Load data for .30-30 Win. + .308 | 140gr | Nosler Custom Competition

Recommended Powder(s): Accurate 2015, Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 140gr \| Nosler Custom Competition
Manufacturer SKU:	53152
Bullet Weight:	140gr \| 9.1g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.010" \| 25.7mm
Caliber:	.30-30 Win. load data
Case Length (l3):	2.039" \| 51.8mm
Cartridge Length (C.O.L.):	2.512" \| 63.8mm
Seated Depth:	0.537" \| 13.6mm
Shank Seated Depth:	0.380" \| 9.6mm
Case Capacity:	45.0 Grains of Water \| 2.92 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	46412 psi \| 3200 bar
LID:	LID_B4079_C328
Last updated:	2025-01-01
Recommended Twist Rate:	1:16 - 1:13

Load data for 74 loads in caliber .30-30 Win. with .308 | 140gr | Nosler Custom Competition bullet and 37 powders such as Accurate 2015, Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	87%	40683	88%	**65	100%
ADI AR 2219	<<locked>>	90%	40495	87%	**92	96%
Accurate 2015 👍	<<locked>>	97%	40843	88%	**82	99%
[Accurate 2460]*	<<locked>>	95%	41118	89%	**82	94%
Accurate 2495	<<locked>>	96%	31546	68%	**03	96%
[Accurate 2520]*	<<locked>>	97%	35723	77%	**36	93%
Alliant AR-Comp 👍	<<locked>>	96%	35810	77%	**59	99%
Alliant Reloder-10x 👍	<<locked>>	94%	41640	90%	**11	99%
Alliant Reloder-7	<<locked>>	86%	40915	88%	**39	99%
Baschieri & Pellagri 106	<<locked>>	90%	41002	88%	**06	97%
[Hodgdon Benchmark]*	<<locked>>	95%	40886	88%	**23	93%
[Hodgdon CFE BLK]*	<<locked>>	86%	41452	89%	**93	92%
Hodgdon H322	<<locked>>	97%	41249	89%	**05	97%
Hodgdon H335	<<locked>>	92%	41365	89%	**05	95%
Hodgdon H4198	<<locked>>	87%	40727	88%	**93	96%
[IMR 3031]*	<<locked>>	96%	30908	67%	**51	94%
IMR 4198 👍	<<locked>>	91%	41321	89%	**52	100%
[Lovex D073.4]*	<<locked>>	93%	41031	88%	**65	93%
[Lovex D073.5]*	<<locked>>	96%	41713	90%	**95	94%
Norma 200 👍	<<locked>>	90%	41205	89%	**88	100%
[Norma 202]*	<<locked>>	96%	34548	74%	**87	93%
[ReloadSwiss RS 40]*	<<locked>>	94%	40785	88%	**75	94%
Rottweil R 901	<<locked>>	97%	39015	84%	**43	95%
SNPE Vectan BA6 1/2	<<locked>>	84%	41452	89%	**56	100%
SNPE Vectan SP 10	<<locked>>	91%	41452	89%	**05	95%
[SNPE Vectan Tubal 3000]*	<<locked>>	96%	37942	82%	**64	94%
[SNPE Vectan Tubal 5000]*	<<locked>>	96%	30705	66%	**26	92%
[Somchem S321]*	<<locked>>	96%	40988	88%	**95	93%
Somchem S335	<<locked>>	96%	36883	79%	**70	95%
Vihtavuori N120	<<locked>>	89%	40509	87%	**20	100%
Vihtavuori N130	<<locked>>	95%	40886	88%	**39	99%
Vihtavuori N133	<<locked>>	96%	34708	75%	**34	96%
[Vihtavuori N135]*	<<locked>>	97%	25962	56%	**93	92%
[Vihtavuori N140]*	<<locked>>	97%	33083	71%	**24	93%
[Vihtavuori N530]*	<<locked>>	97%	41626	90%	**95	92%
[Vihtavuori N540]*	<<locked>>	97%	33040	71%	**51	92%
[Winchester 748]*	<<locked>>	97%	41263	89%	**18	93%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	33678	73%	**44	100%
[ADI AR 2219]*	<<locked>>	81%	30110	65%	**78	92%
[Accurate 2015]*	<<locked>>	81%	24729	53%	**44	93%
[Accurate 2460]*	<<locked>>	89%	33083	71%	**34	90%
[Accurate 2495]*	<<locked>>	85%	21147	46%	**34	90%
[Accurate 2520]*	<<locked>>	92%	30458	66%	**24	90%
[Alliant AR-Comp]*	<<locked>>	81%	22249	48%	**01	93%
Alliant Reloder-10x	<<locked>>	81%	27760	60%	**33	96%
Alliant Reloder-7	<<locked>>	81%	35085	76%	**31	98%
[Baschieri & Pellagri 106]*	<<locked>>	81%	30734	66%	**13	94%
[Hodgdon Benchmark]*	<<locked>>	89%	34243	74%	**98	90%
[Hodgdon CFE BLK]*	<<locked>>	83%	36811	79%	**08	90%
[Hodgdon H322]*	<<locked>>	83%	26992	58%	**96	90%
[Hodgdon H335]*	<<locked>>	81%	29095	63%	**52	90%
[Hodgdon H4198]*	<<locked>>	81%	33852	73%	**62	94%
[IMR 3031]*	<<locked>>	89%	25237	54%	**93	90%
IMR 4198	<<locked>>	81%	30356	65%	**42	97%
[Lovex D073.4]*	<<locked>>	87%	33025	71%	**18	90%
[Lovex D073.5]*	<<locked>>	89%	32764	71%	**28	90%
Norma 200	<<locked>>	81%	31343	68%	**05	98%
[Norma 202]*	<<locked>>	91%	28993	62%	**62	91%
[ReloadSwiss RS 40]*	<<locked>>	86%	32169	69%	**05	90%
[Rottweil R 901]*	<<locked>>	87%	28848	62%	**26	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	37608	81%	**03	100%
[SNPE Vectan SP 10]*	<<locked>>	81%	29950	65%	**75	91%
[SNPE Vectan Tubal 3000]*	<<locked>>	87%	28819	62%	**80	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	91%	26411	57%	**24	90%
[Somchem S321]*	<<locked>>	91%	35215	76%	**90	90%
[Somchem S335]*	<<locked>>	85%	25730	55%	**31	90%
Vihtavuori N120	<<locked>>	81%	31473	68%	**69	100%
Vihtavuori N130	<<locked>>	81%	26716	58%	**54	95%
[Vihtavuori N133]*	<<locked>>	82%	22960	49%	**42	90%
[Vihtavuori N135]*	<<locked>>	94%	23714	51%	**24	90%
[Vihtavuori N140]*	<<locked>>	92%	28543	61%	**19	90%
[Vihtavuori N530]*	<<locked>>	92%	35810	77%	**90	90%
[Vihtavuori N540]*	<<locked>>	93%	29370	63%	**69	90%
[Winchester 748]*	<<locked>>	91%	34722	75%	**83	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.